Back Number

SANYO DENKI Develops 400 VAC, 150 and 300 A Servo Amplifiers
That Can Predict Failures
Detects danger and stops motors immediately

SANMOTION R 3E Model 400V

April 10, 2018


SANYO DENKI CO., LTD. has developed new AC servo amplifiers, expanding the lineup of the SANMOTION R 3E Model series.
This servo amplifier has been equipped with a function for predicting equipment failures using the operating data of the amplifier and motor.
It can operate 5.5 to 30 kW motors smoothly, making it ideal for equipment such as machine tools and injection molding machines.

SANMOTION R 3E Model 400V

Features

1. Innovative Maintenance

This servo amplifier is equipped with various functions: holding brake deterioration diagnosis,(1) power consumption monitoring of regenerative resistors, monitoring of encoder communication quality, and a relay counter.
These enable users to predict equipment failures, leading to innovations in maintenance.

2. Safe and Efficient System

Equipment can be decelerated or stopped immediately when a worker approaches it, ensuring the safety of the workplace.
Furthermore, motors can be stopped with power still available to the equipment, shortening the reboot time.

3. Smooth Motion

In addition to regular analog/pulse models, models with high-speed EtherCAT fieldbus are also available.
The EtherCAT communication cycle is 1/2(3) that of our conventional model,(2) achieving even smoother motion of the embedded equipment.

4. Energy-Saving

The power consumption has been reduced by up to 20%, contributing to saving energy.(4)

(1) Patent pending

(2) Comparison with the SANMOTION R ADVANCED MODEL EtherCAT interface type.

(3) The shortest communication cycle: 62.5 μs (125 μs for the above product in (2))

(4) Comparison with our conventional servo amplifier RS1C15A.

Specifications

Control function Position control, speed control, torque control (switched with parameters)
Control method Sine PWM drive with IGBT
Main circuit power supply 3-Phase 380 to 480 VAC (+10%, -15%), 50/60 ±3 Hz
Control circuit power supply 24 VDC (±10%); 2.0 A (150 A), 2.5 A (300 A)*
Compatible motors SANMOTION R servo motors of 5.5 to 30 kW
Functions / properties - Vibration suppression control, model-following control
- High gain control
- Adaptive notch filter
- Real-time switchover between trajectory control and positioning control
- Micro-vibration control of motors at standstill
- Power consumption monitoring function
Support for startup
& servo tuning		 - Virtual motor operation function to simulate motor and amplifier operations
- Assist function to navigate on servo tuning
- Drive recorder function for recording motor and amplifier operating status

* When powering motor holding brakes with the control power, consider the holding brake current requirements of combination motors for both 150 and 300 A models.

Functional Safety Specifications

Servo amplifier type Safety functions as per
IEC/EN 61800-5-2:2016		 Safety level
EN 61508
IEC/EN 62061		 ISO 13849-1:2015
EN ISO 13849-1:2015
STO model,
Safety model		 STO Safe Torque Off SIL3, SILCL3 Cat.3 PL=e
Safety model SS1 Safe Stop 1
SS2 Safe Stop 2
SOS Safe Operating Stop
SLS Safely-Limited Speed
SBC Safe Brake Control
SSM Safe Speed Monitor

Lineup

Servo amplifier
capacity		 Interface
(safety functions
in parentheses)		 Model no. Dimensions
(mm)		 Mass
(kg)		 Compatible motor
rated output
150 A Analog/Pulse
(without STO)		 RS3C15A0☐L0 220 × 375 × 230 11.0 5.5 to 15 kW
Analog/Pulse
(with STO)		 RS3C15A0☐L2
Analog/Pulse
(Safety model)		 RS3C15A0☐LC
EtherCAT
(with STO)		 RS3C15A2HL4
EtherCAT
(Safety model)		 RS3C15A2HLE
300 A Analog/Pulse
(without STO)		 RS3C30A0☐M0 270 × 375 × 235 18.0 20 to 30 kW
Analog/Pulse
(with STO)		 RS3C30A0☐M2
Analog/Pulse
(Safety model)		 RS3C30A0☐MC
EtherCAT
(with STO)		 RS3C30A2HM4
EtherCAT
(Safety model)		 RS3C30A2HME

Note: ☐'s are wildcard characters for general-purpose output types. A: sinking (NPN) type, B: sourcing (PNP) type.

PDF Catalog

English [1.63MB]

Japanese [1.63MB]

Applications

Machine tools, injection molding machines

Order Start Date

May 14, 2018

Price

Open
Note: The information stated in this release is current as of April 10, 2018.
“ SANMOTION ” is a trademark of SANYO DENKI CO.,LTD.
Topics